Xingqixia from Nanhai District Cycling Xia Trading Co., Ltd. in Foshan City tells everyone that there are some maintenance and upkeep that users can do themselves during the use of motorcycles. This can not only reduce the hassle of going to a repair shop, but also save time and increase your detailed understanding of motorcycles. Let's take a look together with Xingqixia Trading Co., Ltd. in Nanhai District, Foshan City:

　　Maintenance and upkeep of spark plugs

　　Spark plugs are the core components of motorcycle engines. The normal combustion of mixed gases is the core of normal engine operation.

　　Firstly, the product models of spark plugs used in each type of engine are different, mainly due to differences in heating value, thread size, etc. Therefore, it is necessary to use spark plugs with specified product models.

　　The engine is burning normally. Turn on the spark plug to check, and under normal circumstances, the electrodes should be reddish brown. If they turn black, there may be carbon deposits, indicating that the mixture is too rich and the combustion is not sufficient. The carbon deposits should be cleaned. Clean the central electrode concave groove and the carbon deposits on the L-pole with a pointed cone; Adjusting the spark plug gap: GS125 (0.6-0.9mm), QS150T (0.7-0.8mm), carbon buildup on the spark plug can affect good spark performance and may cause a misfire; If it is found that the spark plug is prone to moisture or burns gray white, it indicates that the heat value of the spark plug is not matched, and it should be replaced with a suitable spark plug at a designated repair shop.

       The air filter is the breathing system of a motorcycle.

　　If the air filter is blocked by dust, the resistance of the intake duct will increase, which will reduce the power output of the engine, increase fuel consumption, and make the engine unable to start, making it easy for the engine to stall. In severe cases, dust entering the cylinder block will exacerbate the wear of engine components.